An ideal, “must have” tool for a bassist at work. The preamp with MLO tone correction plus compressor is designed to fulfill all studio and stage needs of bass players.
This is a stomp box containing the most important tools to create perfect bass sound. Very flexible EQ section plus the compressor are providing a wide range of sound characters and dynamic adjustments. From extremely dynamic and saturated to highly compressed , as well as the VINTAGE type with its soft tube-overdriven character.
The Bass engine can be connected and used in different ways:
As an additional sound module connected to the input of the amplifier
As a preamp connected simultaneously to the amplifier and the mixer via the line-out jack / XLR
Connected straight to the mixer as a main source of sound without necessity to use a bass amp on stage.
LEVEL volume level knob
CHRACTER “Mix knob” between “Vintage” & “Modern”sound
GAIN-COMP input gain control with compression adjustment
BASS low frequency level control with MLO system
Triple BASS-switch to reduce or boost low frequency
Triple BASS-switch to reduce or boost low frequency[DBS-cut/OFF/DBS-boost]
Triple BASS-switch to reduce or boost low frequencyCUT/OFF/BOOST
TREBLE high frequency level control with MLO system
Triple TREBLE-switch to reduce or boost high frequency
PUNCH midrange effectiveness switch
FOOTSWITCH MODE true bypass/mute footswitch mode selector
MLO EQ - TECH INFO:
BASS: 40Hz +/-8dB @450Hz -/+4dB
BASS Boost/Cut: 60Hz +/-6dB
TREBLE: 4,5kHz +15dB / 6kHz -15dB
TREBLE Boost/Cut: 7kHz +/-6dB
PUNCH: 300Hz +7dB
POWER SUPPLY VOLTAGE RANGE 9-12V: any power supply with power rating between 9 and 12V can be used
DC ASSISTANT - protects from loss of signal. Effect switches automatically to the "bypass mode" in case of disconnection or low voltage of DC supply.
Subsonic filter: built-in filter which cuts-off very low frequencies which have an adverse impact on the proper work of the speakers. Thanks to the filter, the unwanted frequencies and the accompanied components of the DC voltage are eliminated from the sound. Both components interfere with proper speaker operation by entering uncontrolled membrane fluttering when the low frequencies are applied.
Dimensions: (H x W x D) 65 x 96 x 144mm